[+] CLICK HERE FOR A LARGER IMAGE...
Nitron NTR R3 Race-Pro - Piggy-Back or Remote Hose Mounted Reservoir Rear Shock Absorber for Aprilia RSV4 2017-2018 (3-Way Adjustable) Ref: NITRON-17-18RSV4
Top of the range dedicated track-day and professional race shock - built just for you, to your spec.
All Nitron's race shocks are designed for the most serious and demanding of riders and, as such, incorporate separate high and low speed compression damping control valves for further fine-tuning of setup for race bikes or for very high performance road use and the new Race-Pro has an even higher level of precise damping control.
Available for the most commonly raced Sportsbikes, the Race-Pro's larger 46mm Piston and 16mm Piston Rod creates an increased area for the damper mechanism to operate within for a finer range of adjustments and even higher levels of fade resistance for on-track race length or track day endurance.
Made in England, all Nitron shocks are totally rebuildable and backed with a full UK technical support and service operation.
| "No more wallow... Tim’s new Nitron NTR race Pro shock provides a liberating experience on track."
Staff Bikes Feature, Performance Bikes Magazine |
"...delivers a more supple ride than the stock unit as well as more traction over high - frequency ripples. Its sheer turquoiseness and hand-built loveliness make me feel much faster."
TT, Bike Magazine
|
When ordering from HPS please include your weight (with any specific requirements you may have regarding whether you want a lower or higher default seat height - i.e. if you are taller or shorter than average) and state how your bike is used (i.e. road solo only, road with pillion, road and track or track only etc.) as we will be building your shock to your specific order with the optimum length, spring rate and damper adjustments pre-set for you.
Please don't hesitate to call us at HPS to ask your suspension questions - we will be very happy to discuss your needs and assist.
- HPS will build your shock to order with the specification based on your individual needs and with all adjustments pre-set (see above)
- New 46mm "Big Piston" design
- Manufactured with a hard-anodised corrosion-resistant aluminium alloy CNC machined body using the highest quality internal components
- Piggy-Back or remote 360 degree swiveling hose mounted gas pressure reservoir ± for fade-free consistent high-performance operation
- Manual preload adjustment with c-spanner included, or...
- Optional Hydraulic Remote Preload Adjuster System (HPA) for quick changes to rear ride-height to vary steering response between road and track (also ideal for shorter riders or for those bikes where the laden weight varies significantly; e.g. from solo to with pillion & luggage)
- *Adjustable/increasable length as standard (for most bikes please confirm re. your bike prior to ordering) to fine tune ride-height and steering)
- Shorter shocks available to order for many bikes (please call/contact to confirm) for smaller riders who may wish to lower seat - typical seat height reduction achievable is up to 30mm/1.25”
- Very light weight (e.g. Triumph 675, more than 0.5 Kg lighter, even with Hydraulic Preload Adjuster included for Race version)
- Low friction rose jointed eyes where applicable (bike-dependent end fittings may differ from those shown here)
- Separate compression and rebound damping adjustment for more advanced bike setup
- By far the best value professional race level shock you can buy
- 3rd piston Shim-Stack for very low speed rebound damping control
- Teflon lined low-friction rose jointed eyes where applicable (bike-dependent end fittings may differ from those shown here
- Ultra low-friction piston rod seal design
- Completely rebuildable/re-valvable with rapid UK maintenance and support service
- The highest quality race shock you can buy
- Includes Full 5 Year Warranty from HPS
Please note the choice of Remote-Reservoir or Piggy-Back is bike model application dependent
Please also note that for certain applications, appearance (i.e., colour of some components), may vary from those shown.
Price:£745.00 (£894.00 Including UK VAT at 20%)
(Shipping costs calculated before checkout and 20% UK VAT/tax will be removed for non-UK destinations)
|
[+] CLICK HERE FOR A LARGER IMAGE...
Nitron Hydraulic Preload Adjuster Ref: 54145 The hydraulic preload adjuster allows you to quickly and easily change the preload on the spring via a remote knob making c-spanners and other tools unnecessary.
This is particularly useful for people who regularly take pillion passengers and/or luggage, as it allows you to compensate for a variation in load, maintaining the comfort and handling characteristics of your motorcycle by retaining the correct ride height. It is also very useful for bikes used on the track, particularly for racers as it allows fine tuning of the ride height which often needs to be different from one track to another.
This is normally added at the time a shock is purchased but the unit can also be retrofitted to your existing Nitron shock to replace the manual preload adjustment. Please call HPS to check the availability for your existing shock first as there may be a possibility that the spring will need to be replaced for that of a smaller one and please note the retro fitment of a hydraulic preload adjuster requires your shock to be returned to us.
(Shipping costs calculated before checkout and 20% UK VAT/tax will be removed for non-UK destinations)
|
