JPB Ventilated Titanium Caliper Racing Pistons

SPECIAL CLEARANCE PRICE... SAVE £60 PER CALIPER WHILE STOCKS LAST!
Normal price £240 per caliper set

Select your bike or caliper type from the pull-down menu below.


Reduce brake drag, increase top speed, and improve release time for greater control exiting the apex.

Even though most bike makers claim to fit high spec. calipers to their bikes, like most original equipment components, everything is built to a price and unfortunately original-fit calipers are ordinarily still using problematic Aluminum pistons – lightweight, yes, but also highly conductive in providing a huge heat path straight into the hydraulics.

Overcome this by upgrading your calipers for enhanced overall braking consistency under severe race conditions with these precision engineered castellated and ventilated, lightweight Titanium pistons from JP Brakes, featuring a chamfered outer edge with ventilation holes - to minimise heat transfer - along with a concave rear face to increase fluid capacity, and a DLC diamond-hard, low-friction, temperature-resistant coating, with internal radial fins for additional heat dissipation.

These unique patented pistons will allow you to maintain a cooler and more stable braking system, even with the hardest of braking on the street and on the track!

This style of caliper piston has been used at all levels of racing around the world including Moto GP, BSB Superbike and MotoAmerica Superbike Racing.

• Heat reducing castellated design with ventilation holes and internal radial fins
• Reduce or eliminate brake fade
• Concave rear face to increase fluid capacity
• Chamfered edge to reduce pad backplate contact patch
• Diamond Hard DLC Coating with the lowest friction possible to resist wear and slide more freely
• Temperature resistant to 400°c
• Significantly reduced wear to your pads (meaning these pistons will pay for themselves!)
• UK made from lightweight Titanium
• Advanced patented design
• Stealth look - dark grey colour to match OEM pistons

More Great Products for Your Bike...

1. Genuine Brembo 34mm Piston Seals for M4 Caliper ...

SPECIAL CLEARANCE PRICE... SAVE £60 PER CALIPER WHILE STOCKS LAST!
Normal price £240 per caliper set

Select your bike from the pull-down menu below.


Reduce brake drag, increase top speed, and improve release time for greater control exiting the apex.

Even though most bike makers claim to fit high spec. calipers to their bikes, like most original equipment components, everything is built to a price and unfortunately original-fit calipers are ordinarily still using problematic Aluminum pistons – lightweight, yes, but also highly conductive in providing a huge heat path straight into the hydraulics.

Overcome this by upgrading your calipers for enhanced overall braking consistency under severe race conditions with these precision engineered castellated and ventilated, lightweight Titanium pistons from JP Brakes, featuring a chamfered outer edge with ventilation holes - to minimise heat transfer - along with a concave rear face to increase fluid capacity, and a DLC diamond-hard, low-friction, temperature-resistant coating, with internal radial fins for additional heat dissipation.

These unique patented pistons will allow you to maintain a cooler and more stable braking system, even with the hardest of braking on the street and on the track!

This style of caliper piston has been used at all levels of racing around the world including Moto GP, BSB Superbike and MotoAmerica Superbike Racing.

• Heat reducing castellated design with ventilation holes and internal radial fins
• Reduce or eliminate brake fade
• Concave rear face to increase fluid capacity
• Chamfered edge to reduce pad backplate contact patch
• Diamond Hard DLC Coating with the lowest friction possible to resist wear and slide more freely
• Temperature resistant to 400°c
• Significantly reduced wear to your pads (meaning these pistons will pay for themselves!)
• UK made from lightweight Titanium
• Advanced patented design
• Stealth look - dark grey colour to match OEM pistons

More Great Products for Your Bike...

1. Genuine Brembo 32mm Piston Seals for GP4-RX Caliper ...

SPECIAL CLEARANCE PRICE... SAVE £102 PER CALIPER WHILE STOCKS LAST!
Normal price £240 per caliper set

Suitable for...
BMW S1000RR Gen 4 (with Hayes Calipers) 2019> onwards


Reduce brake drag, increase top speed, and improve release time for greater control exiting the apex.

Even though most bike makers claim to fit high spec. calipers to their bikes, like most original equipment components, everything is built to a price and unfortunately original-fit calipers are ordinarily still using problematic Aluminum pistons – lightweight, yes, but also highly conductive in providing a huge heat path straight into the hydraulics.

Overcome this by upgrading your calipers for enhanced overall braking consistency under severe race conditions with these precision engineered castellated and ventilated, lightweight Titanium pistons from JP Brakes, featuring a chamfered outer edge with ventilation holes - to minimise heat transfer - along with a concave rear face to increase fluid capacity, and a DLC diamond-hard, low-friction, temperature-resistant coating, with internal radial fins for additional heat dissipation.

These unique patented pistons will allow you to maintain a cooler and more stable braking system, even with the hardest of braking on the street and on the track!

This style of caliper piston has been used at all levels of racing around the world including Moto GP, BSB Superbike and MotoAmerica Superbike Racing.

• Heat reducing castellated design with ventilation holes and internal radial fins
• Reduce or eliminate brake fade
• Concave rear face to increase fluid capacity
• Chamfered edge to reduce pad backplate contact patch
• Diamond Hard DLC Coating with the lowest friction possible to resist wear and slide more freely
• Temperature resistant to 400°c
• Significantly reduced wear to your pads (meaning these pistons will pay for themselves!)
• UK made from lightweight Titanium
• Advanced patented design
• Stealth look - dark grey colour to match OEM pistons

More Great Products for Your Bike...

1. Genuine Brembo 32mm Piston Seals for GP4-RX Caliper ...

SPECIAL CLEARANCE PRICE... SAVE £27 PER CALIPER WHILE STOCKS LAST!
Normal price £135 per caliper set

Suitable for...
Honda CB500 1997-2002 with Brembo Caliper


Reduce brake drag, increase top speed, and improve release time for greater control exiting the apex.

Even though most bike makers claim to fit high spec. calipers to their bikes, like most original equipment components, everything is built to a price and unfortunately original-fit calipers are ordinarily still using problematic Aluminum pistons – lightweight, yes, but also highly conductive in providing a huge heat path straight into the hydraulics.

Overcome this by upgrading your calipers for enhanced overall braking consistency under severe race conditions with these precision engineered castellated and ventilated, lightweight Titanium pistons from JP Brakes, featuring a chamfered outer edge with ventilation holes - to minimise heat transfer - along with a concave rear face to increase fluid capacity, and a DLC diamond-hard, low-friction, temperature-resistant coating, with internal radial fins for additional heat dissipation.

These unique patented pistons will allow you to maintain a cooler and more stable braking system, even with the hardest of braking on the street and on the track!

This style of caliper piston has been used at all levels of racing around the world including Moto GP, BSB Superbike and MotoAmerica Superbike Racing.

• Heat reducing castellated design with ventilation holes and internal radial fins
• Reduce or eliminate brake fade
• Concave rear face to increase fluid capacity
• Chamfered edge to reduce pad backplate contact patch
• Diamond Hard DLC Coating with the lowest friction possible to resist wear and slide more freely
• Temperature resistant to 400°c
• Significantly reduced wear to your pads (meaning these pistons will pay for themselves!)
• UK made from lightweight Titanium
• Advanced patented design
• Stealth look - dark grey colour to match OEM pistons

SPECIAL CLEARANCE PRICE... SAVE £27 PER CALIPER WHILE STOCKS LAST!
Normal price £135 per caliper set

Suitable for...
Honda CB500 1997-2002 with Nissin Caliper


Reduce brake drag, increase top speed, and improve release time for greater control exiting the apex.

Even though most bike makers claim to fit high spec. calipers to their bikes, like most original equipment components, everything is built to a price and unfortunately original-fit calipers are ordinarily still using problematic Aluminum pistons – lightweight, yes, but also highly conductive in providing a huge heat path straight into the hydraulics.

Overcome this by upgrading your calipers for enhanced overall braking consistency under severe race conditions with these precision engineered castellated and ventilated, lightweight Titanium pistons from JP Brakes, featuring a chamfered outer edge with ventilation holes - to minimise heat transfer - along with a concave rear face to increase fluid capacity, and a DLC diamond-hard, low-friction, temperature-resistant coating, with internal radial fins for additional heat dissipation.

These unique patented pistons will allow you to maintain a cooler and more stable braking system, even with the hardest of braking on the street and on the track!

This style of caliper piston has been used at all levels of racing around the world including Moto GP, BSB Superbike and MotoAmerica Superbike Racing.

• Heat reducing castellated design with ventilation holes and internal radial fins
• Reduce or eliminate brake fade
• Concave rear face to increase fluid capacity
• Chamfered edge to reduce pad backplate contact patch
• Diamond Hard DLC Coating with the lowest friction possible to resist wear and slide more freely
• Temperature resistant to 400°c
• Significantly reduced wear to your pads (meaning these pistons will pay for themselves!)
• UK made from lightweight Titanium
• Advanced patented design
• Stealth look - dark grey colour to match OEM pistons

SPECIAL CLEARANCE PRICE... SAVE £102 PER CALIPER WHILE STOCKS LAST!
Normal price £240 per caliper set

2x 30mm & 2x 34 mm pistons suitable for...
Brembo HPK (2-piece) Calipers
Brembo P4 30/34 (Goldline Twin-Pin) Calipers

Reduce brake drag, increase top speed, and improve release time for greater control exiting the apex.

Even though most bike makers claim to fit high spec. calipers to their bikes, like most original equipment components, everything is built to a price and unfortunately original-fit calipers are ordinarily still using problematic Aluminum pistons – lightweight, yes, but also highly conductive in providing a huge heat path straight into the hydraulics.

Overcome this by upgrading your calipers for enhanced overall braking consistency under severe race conditions with these precision engineered castellated and ventilated, lightweight Titanium pistons from JP Brakes, featuring a chamfered outer edge with ventilation holes - to minimise heat transfer - along with a concave rear face to increase fluid capacity, and a DLC diamond-hard, low-friction, temperature-resistant coating, with internal radial fins for additional heat dissipation.

These unique patented pistons will allow you to maintain a cooler and more stable braking system, even with the hardest of braking on the street and on the track!

This style of caliper piston has been used at all levels of racing around the world including Moto GP, BSB Superbike and MotoAmerica Superbike Racing.

• Heat reducing castellated design with ventilation holes and internal radial fins
• Reduce or eliminate brake fade
• Concave rear face to increase fluid capacity
• Chamfered edge to reduce pad backplate contact patch
• Diamond Hard DLC Coating with the lowest friction possible to resist wear and slide more freely
• Temperature resistant to 400°c
• Significantly reduced wear to your pads (meaning these pistons will pay for themselves!)
• UK made from lightweight Titanium
• Advanced patented design
• Stealth look - dark grey colour to match OEM pistons

More Great Products for Your Bike...

1. Genuine Brembo 34mm Piston Seals for M4 Caliper ...

2. Genuine Brembo 30mm Piston Seals for M50, GP4-RS ...