My CartView CartCheckout

My Cart

Items:  items
Value: 
View CartCheckout
                                                     
Search for your bikeSelect your bike below, or use 'Quick Search' if it's not listed...
     

 

Yamaha XTZ700 Tenere 700 2021> onwards

Madstad Adjustable Screen for Yamaha XTZ700 Tenere 700 (XTZ690) 2021> onwards
[+] CLICK HERE FOR MORE IMAGES...

Madstad Adjustable Screen for Yamaha XTZ700 Tenere 700 (XTZ690) 2021> onwards

Ref: MADXTZ700

The Versatile Madstad Complete Solution - Adjustable RoboBracket with Screen

Gives you total control over your windshield height, angle and airflow for the most comfort.

Madstad accomplishes superior airflow by separating your bike's windshield from its fairing with the patented adjustable RoboBracket system. By scooping air up under the windshield, it eliminates the vacuum normally generated behind your screen which causes turbulence and buffeting.

Your new windshield will then be fully adjustable for height, tilt and depth (distance from the rider). With the windshield raised from the fairing, air can flow underneath, eliminating the turbulence-causing vacuum behind it and giving you total control over the airflow and position of your shield, meaning one size shield will work perfectly for many different height riders.

Transform your ride with MadStad RoboBrackets, an adjustable wind management system that allows you to control the position and angle of your motorcycle windshield. The result is much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield could ever provide.

Why adapt to your windshield when your windshield can adapt to you?

This is a complete custom made system consisting of:

- A set of Madstad adjustable brackets
- A complete replacement windshield in Clear or Medium Grey tint

Typical screen size guide for your height
Under 5'8" (172cm) - 16-inch (406mm) screen
5'8" - 5'11" (173 - 180cm) - 18-inch (460mm) screen
6'0" - 6'2" (183 - 188cm) - 20-inch (510mm) screen
Over 6'2" (188cm) - 22-inch (560mm) screen

How to measure
Sit on the bike and run a tape measure straight up from the top of the "tank" and look straight ahead at about your mouth level. Take that measurement and add 2 inches and that is the shield size you should order. For example, if your mouth level is at about 16" above the "tank" then that is where the top of our 18 inch windshield will be when in its lowest position. If your mouth level is at 18 inches then order a 20 inch shield, and so on. If you are in-between sizes then round down because our brackets will let you raise the shield another 2 inches. For example, if your mouth level is at about 17 inches then order an 18 inch shield, you can simply use the supplied brackets to raise it up for more wind protection.

Please Note: These are factory produced to order with approx. 2-3 weeks delivery (non-refundable payment taken at time of order).


More Information

Please select your screen size and tint

Tick here to add the optional Mini Fly Screen (in Extra Dark Grey Tint) @ £74.81 inc. VAT
Add a Quixx Xerapol Plastic Polish/Scratch Remover Kit to keep your screen looking like new, £11.20





(Shipping costs calculated before checkout and 20% UK VAT/tax will be removed for non-UK destinations)