TRANSLOGIC QS6 MX SUPERMOTO/MOTOCROSS QUICKSHIFTER(Reference #QS6) Designed for single cylinder Supermoto and Motocross bikes as well as Karts, this `F' series quickshifter system is self powered by an internal 9v PP3 battery - ideal for bikes that have no battery. This allows you to shift up gears at constant or full throttle without the use of the clutch. This system allows the rear tyre to maintain traction under maximum acceleration (vital on loose surfaces found in Supermoto and Motocross) when shifting up the gears and is an ideal tool for those all important hole shot starts. Typically 3 yards can be gained per gear shift and a saving of around 200ms can be made per gear shift for those long straights. The special long Linear sensor is designed to keep the body section of the sensor out of reach of the rocks and debris and away from the mud packed gear lever and boot area. It features a triple seal design with anti-vibration construction for superior longevity, also a rugged stainless steel 6.0mm diameter shaft sensor shaft. These long Linear sensors monitor the position of the gear lever for precise quickshifting and offer repeatable triggering to 0.10mm. This quickshifter is micro controlled and therefore does not require any programming or adjusting once fitted. The quickshifter ECU is positioned up near the top yoke via the supplied mounting bracket and has a simple 2 wire connection to either to the engine stop switch wires or the pick-up/signal generator wires. The linear sensor is mounted between the gearlever and the engine/chassis, in some cases Translogic have developed mounting brackets for bike specific applications. - Unique Intellishift quickshifter - Full/part throttle upshifts without the use of the clutch - Micro controlled - compact design - User defined interrupt times - Integral standard 9volt battery power supply - lasts up to 2 years - Weather proof construction - Tough Derin ECU housing - aluminium mounting bracket - Extra tough long linear sensor design - designed to last  Click here for a detailed image Price:  £249.98 Including VAT at 17.5% TRANSLOGIC QS2 UNIVERSAL QUICKSHIFTER SYSTEM WITH GP SENSOR (Reference #QS2GP) As used by numerous BSB teams, this `F' series Quickshifter system is a full spec Superbike quickshifter with unique ‘Intellishift’ adaptive quickshifting. This allows you to shift up gears at constant or full throttle without the use of the clutch for lightning smooth acceleration at any RPM. Typically 3 yards can be gained per gear shift and a saving of around 200ms can be made per gear shift for those long staights. These Quickshifter systems are available with either GP pressure sensors and universal tie-rod kit or with a linear sensor for direct gear lever attachment. - Factory Race team recommended - Multi-Channel Quickshifter System - Unique Intellishift Quickshifter - Full/part throttle upshifts without the use of the clutch - Micro Controlled - compact design - User defined interrupt times - Plug & Play connectors for all stick coil installations as standard - Weather proof construction - Tough Aluminium ECU housing - Delrin mounting plate - GP pressure sensor as standard - no adjustment required - Linear sensor option - for direct gear lever fitment - Superbike/Supersport Championship winning product  Click here for a larger image... Price:  £319.99 Including VAT at 17.5% Choose Type Required... QS2 with Compression Activated GP SensorQS2 with Tension Activated GP SensorQS2 with Compression Activated Linear SensorQS2 with Tension Activated Linear Sensor TRANSLOGIC QS4 UNIVERSAL QUICKSHIFTER(Reference #50661) The top-of-the-range quickshifter available from Translogic featuring AST (Adaptive Shift Technology) + Intellishift. This adaptive quickshifter allows you to shift up gears at constant or full throttle without the use of the clutch for ultra smooth up-shifts at any RPM. The innovative AST system adapts itself to the RPM of the engine bringing the engine back on line progressively at lower engine revolutions. As the RPMs rise, each gear change remains as smooth as possible as the `F' series ECU has 100s of different interrupt durations at its disposal to execute the perfect shift. Typically 3 yards can be gained per gear shift and a saving of around 200ms can be made per gear shift for those long staights. This unique quickshifter design only operates after the first 25% of the rev range which results in no stalling when selecting neutral. These Quickshifter systems are available with either GP pressure sensors and universal tie-rod kit or with a linear sensor for direct gear lever attachment. An optional plug-in remote shiftlight array is available see below. - Factory Race team recommended - Unique AST & Intellishift Quickshifter - Adaptive Shift Technology - Multi-Channel Quickshifter System - Plug-and-play fitting – simply plugs into existing wiring loom - Full/part throttle upshifts without the use of the clutch - Micro Controlled - Compact Design - Plug & Play connectors for all stick coil installations as standard - Weather Proof Construction - Tough Aluminium ECU Housing - Delrin mounting plate - GP Pressure Sensor as standard - no adjustment required - Linear Sensor option - for direct gear lever fitment - Optional ultra-bright 7 LED Shift Light Array - flush or bracket mount - Superbike Championship winning product  Click here for a detailed image... Price:  £439.98 Including VAT at 17.5% Choose type required... QS4 with Compression Activated GP SensorQS4 with Tension Activated GP SensorQS4 with Compression Activated Linear SensorQS4 with Tension Activated Linear Sensor TRANSLOGIC QS4 OPTIONAL REMOTE SHIFT LIGHT ARRAY (Reference #43375) Optional remote shift light array for QS4 - simply plugs into the quick shifter loom. This Mega-bright remote shift light cluster utilises the latest daylight viewable LED technology. The combined brightness exceed 14,000mcd and is viewable in direct sunlight making it an ideal upgrade for the standard shift lights found on some standard OEM gauges. The shift light array is housed within a super light aluminium and durable Delrin housing and comes fitted into a CNC machined from NS4 grade aluminium bracket so it can be bent or cut offering multiple mounting positions. The shift light assembly can be unscrewed to allow `flush' dash panel fitment.  Click here for a detailed image Price:  £39.99 Including VAT at 17.5% TRANSLOGIC MICRO DASH(Reference #43370) The Translogic Micro Dash utilises the pinnacle of LCD technology to bring you the clearest and most up-to-date display. Features include speedometer, temperature gauge, battery voltage, neutral selection, high beam, indicator selected. gear position indication, a large sweeping bar graph type rpm indicator , a 7 Mega-bright LED shift light array for optimum rpm gear shifts and a lap timer which can be operated manually by the sealed tactile waterproof button (CNC machined aluminium handle bar bracket supplied) or automatically triggered by a suitable pit wall transmitter and receiver. Suitable for the road or track rider all the information is clearly displayed whether in daylight or at night (backlit display). Simply replace your original speedo and rev counter with this smart, tough and accurate dash. - Overall dimension - 192mm X 115mm X 26mm. ?Viewing area - 130mm X 71mm (MAX) - Weight (packaged) - 1.4kgs - General RPM with Numeric Indication - Speedometer - User Defined MPH or KMH - Gear Indicator - Neutral indication - Battery voltage - High Beam Indication - Ultra-Bright 7 LED Shift Light Array - Full or Half Brightness - Engine Temperature - User Defined Centigrade or Fahrenheit - Odometer - Total Distance & Trip Distance - Low Fuel Indication - user defined - 2 Input Channels - Ideal for Indicators Left & Right - Backlighting for Night Use - User Defined Red or Blue - Clarex Anti-Glare Screen - Billet Aluminium Construction - Manual Lap-Timer (100 laps memory) - Handle Bar Bracket for Manual Lap-timer Button - 4 Ladder Frame brackets for Universal Installation  Click here for a larger image... Price:  £549.99 Including VAT at 17.5% TRANSLOGIC RETRO-FIT SPEED SENSOR(Reference #34165) The retro-fit speed sensor allows the Micro Dash to function on early models of motorcycles and car installations where an electronic speed sensor is absent, usually mechanical speedo applications. The sensor must be positioned so the end face is approximately 1 - 4mm away from a suitable ferrous metal target like a sprocket or brake disc bolt. The LED indicator situated in the sensor cable will flash each time the target passes the end face of the sensor when there is a good clean signal.  Price:  £59.98 Including VAT at 17.5% Electrical, Electronic & Instruments:Quickshifters:Translogic Quickshifters