My CartView CartCheckout

My Cart

Items:  items
Value: 
View CartCheckout
                                                     
Search for your bikeSelect your bike below, or use 'Quick Search' if it's not listed...
     

 

Nitron Shocks for Yamaha

Nitron NTR R1 Sport - Big-Piston Integral Pressurised Gas-Monotube Rear Shock Absorber for Yamaha Motorcycles
[+] CLICK HERE FOR A LARGER IMAGE...

Nitron NTR R1 Sport - Big-Piston Integral Pressurised Gas-Monotube Rear Shock Absorber for Yamaha Motorcycles

Ref: NTSPTYAM


Simply fit and feel the ride

The perfect, compliant and controlled road shock - built just for you, to your exact specification, from your suspension specialists, HPS


Despite being Nitron's entry level bespoke rear shock absorber, with its full 40mm diameter piston, this unit will outperform much more expensive units from the "bigger" manufacturers and will always offer a significant improvement in comfort and response over the OE shock fitted to your bike - even if it has a remote or piggy-back reservoir. It features a totally uncomplicated single adjuster knob which tunes both rebound and compression damping simultaneously - making it perfect for the road biased rider and, don't forget, we have a special build service for shorter riders who need a lower seat height; please ask for details.

Made in England, all Nitron shocks supplied by HPS are totally rebuildable and backed with a full UK technical support and service operation.

Best products of the year feature

"Nitron Sport shock... Affordable, high quality suspension unit for road riders."
Rupert Paul, Journalist, BIKE magazine


"Just fitted my R1 rear shock to my Tracer, & although the roads are far from ideal the bike feels so much more planted, the ride feel less harsh & for want of a better word really plush. Thanks again."

CR, South Yorkshire
2017 Yamaha MT-09 Tracer


When ordering from HPS, please include your weight (with any specific requirements you may have regarding whether you want a lower or higher default seat height - i.e. if you are taller or shorter than average) and state how your bike is used (i.e. road solo only, road with pillion, road and track or track only etc.) as we will be building your shock to your specific order with the optimum length, spring rate and damper adjustments pre-set for you.

Please don't hesitate to call us at HPS to ask your suspension questions - we will be very happy to discuss your needs and assist.

  • HPS will build your shock to order with the specification based on your individual needs and with all adjustments pre-set (see above)
  • Large 40mm piston for more precise and consistent damping control (23.5% more damping oil flow than Öhlins TTX 36mm piston)
  • Very straightforward single adjuster for rapid combined damping adjustment
  • Manufactured from a hard-anodised corrosion-resistant CNC machined aluminium alloy body, combined with the same high quality internal components as in Nitron's range-topping shocks
  • Pressurised Gas-Monotube design
  • Manual preload adjustment with C-Spanner included, or...
  • Optional remote Hydraulic Preload Adjuster (HPA) for instant changes to rear ride-height (eliminates use of C-Spanner) to vary steering response between road and track (also ideal for shorter riders or for those bikes where the laden weight varies significantly; e.g. from solo to with pillion & luggage)
  • *Adjustable/increasable length as standard (for most bikes please confirm re. your bike prior to ordering) to fine tune ride-height and steering)
  • Shorter shocks available to order for many bikes (please call/contact to confirm) for smaller riders who may wish to lower seat - typical seat height reduction achievable is up to 30mm/1.25”
  • Very light weight (e.g. Triumph 675, more than 0.5 Kg lighter, even with Hydraulic Preload Adjuster included for Race version)
  • For shorter riders the typical lower seat height achievable is up to 30mm/1.25"
  • 3rd piston Shim-Stack for very low speed rebound damping control
  • Teflon lined low-friction rose jointed eyes where applicable (bike-dependent end fittings may differ from those shown here)
  • Ultra low-friction piston rod seal design
  • Completely rebuildable/re-valvable with rapid UK maintenance and support service
  • By far the highest quality and best value entry level bespoke shock you can buy
  • Includes Full 5 Year Warranty from HPS



Please note that for certain applications, appearance (i.e., colour of some components), may vary from those shown.


More Information

Choose your bike...

Choose your spring colour...

Tick here to add a Hydraulic Preload Adjuster (HPA) for just £264.00 inc. VAT

Price:£459.00 (£550.80 Including UK VAT at 20%)





(Shipping costs calculated before checkout and 20% UK VAT/tax will be removed for non-UK destinations)




Read the Nitron NTR R1 Sport - Big-Piston Integral Pressurised Gas-Monotube Rear Shock Absorber for Yamaha Motorcycles Reviews...
(Overall Rating: 10 out of 10)

  Very happy  I have received my sports shock and am very happy with it, thanks a lot for all your help it was very easy.    Dave - Yamaha 1985 RZV500


Nitron NTR R3 Race - Remote-Reservoir Rear Shock Absorber for Yamaha Motorcycles (3-Way Adjustable)
[+] CLICK HERE FOR A LARGER IMAGE...

Nitron NTR R3 Race - Remote-Reservoir Rear Shock Absorber for Yamaha Motorcycles (3-Way Adjustable)

Ref: NTRACYAM


Superb value TRACK-DAY and RACE shock - built just for you, to your spec. (we can also build this shock for you in ROAD spec.)


Nitron's race shocks are designed for the most serious and demanding of riders and as such incorporate separate high and low speed compression damping control valves for further fine-tuning of setup for race bikes or for very high performance road use.

Offering significant dynamic and adjustability range benefits over OE sports bike shocks, this is the perfect unit for anyone looking for the best value performance shock you can buy, making it ideal for mixed road and track use.

"I’ve used the shock on both the road and track and it gives a glorious combination of support under load and sublime ride quality – and it does this for less than most rival brands. It’s very,very good. The range of adjustability is great, as is the fact that you get big adjuster knobs which you can turn by hand, a lovely preload spanner and a handbook with a troubleshooting guide to set-up.

...the result is just what I was after - more low speed compression control, more rebound if I needed it."

Matt Wildee, Editor - Performance Bikes Magazine
Yamaha 2000 YZF-R1


Made in England, all Nitron shocks are totally rebuildable and backed with a full UK technical support and service operation.

When ordering from HPS please include your weight (with any specific requirements you may have regarding whether you want a lower or higher default seat height - i.e. if you are taller or shorter than average) and state how your bike is used (i.e. road solo only, road with pillion, road and track or track only etc.) as we will be building your shock to your specific order with the optimum length, spring rate and damper adjustments pre-set for you.

Please don't hesitate to call us at HPS to ask your suspension questions - we will be very happy to discuss your needs and assist.

  • HPS will build your shock to order with the specification based on your individual needs and with all adjustments pre-set (see above)
  • Manufactured with a hard-anodised corrosion-resistant aluminium alloy CNC machined body using the highest quality internal components
  • Remote Hose (H) or Piggy-Back (PB) mounted gas pressure reservoir (bike model application dependent) for fade-free consistent high-performance operation
  • Manual preload adjustment with c-spanner included, or...Optional Hydraulic Remote Preload Adjuster System (HPA) for quick changes to rear ride-height to vary steering response between road and track (also ideal for shorter riders or for those bikes where the laden weight varies significantly; e.g. from solo to with pillion & luggage)
  • *Adjustable/increasable length as standard (for most bikes please confirm re. your bike prior to ordering) to fine tune ride-height and steering)
  • Shorter shocks available to order for many bikes (please call/contact to confirm) for smaller riders who may wish to lower seat - typical seat height reduction achievable is up to 30mm/1.25”
  • Very light weight (e.g. Triumph 675, more than 0.5 Kg lighter, even with Hydraulic Preload Adjuster included for Race version)
  • Separate compression and rebound damping adjustment for more advanced bike setup
  • By far the best value professional race level shock you can buy
  • 3rd piston Shim-Stack for very low speed rebound damping control
  • Teflon lined low-friction rose jointed eyes where applicable (bike-dependent end fittings may differ from those shown here
  • Ultra low-friction piston rod seal design
  • Completely rebuildable/re-valvable with rapid UK maintenance and support service
  • The highest quality - combined with the best value - race shock you can buy
  • Includes Full 5 Year Warranty from HPS

Please note, because of limited upper spring seat access within the swinging arm - a small number of bikes do require the Hydraulic Preload Adjuster (HPA) to be fitted as standard.




Please also note that for certain applications, appearance (i.e., colour of some components), may vary from those shown.


More Information

Choose your bike...

Choose your spring colour...

Tick here to add a Hydraulic Preload Adjuster (HPA) for just £264.00 inc. VAT





(Shipping costs calculated before checkout and 20% UK VAT/tax will be removed for non-UK destinations)




Nitron NTR R3 Race-Pro - Remote Hose Mounted Reservoir Rear Shock Absorber for Yamaha Motorcycles (3-Way Adjustable)
[+] CLICK HERE FOR A LARGER IMAGE...

Nitron NTR R3 Race-Pro - Remote Hose Mounted Reservoir Rear Shock Absorber for Yamaha Motorcycles (3-Way Adjustable)

Ref: NTRRPYAM


Top of the range dedicated track-day and professional race shock - built just for you, to your spec.


All Nitron's race shocks are designed for the most serious and demanding of riders and, as such, incorporate separate high and low speed compression damping control valves for further fine-tuning of setup for race bikes or for very high performance road use and the new Race-Pro has an even higher level of precise damping control.

Available for the most commonly raced Sportsbikes, the Race-Pro's larger 46mm Piston and 16mm Piston Rod creates an increased area for the damper mechanism to operate within for a finer range of adjustments and even higher levels of fade resistance for on-track race length or track day endurance.



Made in England, all Nitron shocks are totally rebuildable and backed with a full UK technical support and service operation.

"No more wallow... Tim’s new Nitron NTR race Pro shock provides a liberating experience on track."

Staff Bikes Feature, Performance Bikes Magazine


"...delivers a more supple ride than the stock unit as well as more traction over high - frequency ripples. Its sheer turquoiseness and hand-built loveliness make me feel much faster."

TT, Bike Magazine
2009 ZX-6R

When ordering from HPS please include your weight (with any specific requirements you may have regarding whether you want a lower or higher default seat height - i.e. if you are taller or shorter than average) and state how your bike is used (i.e. road solo only, road with pillion, road and track or track only etc.) as we will be building your shock to your specific order with the optimum length, spring rate and damper adjustments pre-set for you.

Please don't hesitate to call us at HPS to ask your suspension questions - we will be very happy to discuss your needs and assist.

  • HPS will build your shock to order with the specification based on your individual needs and with all adjustments pre-set (see above)
  • New 46mm "Big Piston" design
  • Manufactured with a hard-anodised corrosion-resistant aluminium alloy CNC machined body using the highest quality internal components
  • Remote 360 degree swiveling hose mounted gas pressure reservoir ± for fade-free consistent high-performance operation
  • Manual preload adjustment with c-spanner included, or...
  • Optional Hydraulic Remote Preload Adjuster System (HPA) for quick changes to rear ride-height to vary steering response between road and track (also ideal for shorter riders or for those bikes where the laden weight varies significantly; e.g. from solo to with pillion & luggage)
  • *Adjustable/increasable length as standard (for most bikes please confirm re. your bike prior to ordering) to fine tune ride-height and steering)
  • Shorter shocks available to order for many bikes (please call/contact to confirm) for smaller riders who may wish to lower seat - typical seat height reduction achievable is up to 30mm/1.25”
  • Very light weight (e.g. Triumph 675, more than 0.5 Kg lighter, even with Hydraulic Preload Adjuster included for Race version)
  • Low friction rose jointed eyes where applicable (bike-dependent end fittings may differ from those shown here)
  • Separate compression and rebound damping adjustment for more advanced bike setup
  • By far the best value professional race level shock you can buy
  • 3rd piston Shim-Stack for very low speed rebound damping control
  • Teflon lined low-friction rose jointed eyes where applicable (bike-dependent end fittings may differ from those shown here
  • Ultra low-friction piston rod seal design
  • Completely rebuildable/re-valvable with rapid UK maintenance and support service
  • The highest quality race shock you can buy
  • Includes Full 5 Year Warranty from HPS


Please note that for certain applications, appearance (i.e., colour of some components), may vary from those shown.


More Information

Choose your bike...

Choose your spring colour...

Tick here to add a Hydraulic Preload Adjuster (HPA) for just £264.00 inc. VAT (already included with MT-09 & XSR900)





(Shipping costs calculated before checkout and 20% UK VAT/tax will be removed for non-UK destinations)




Nitron Hydraulic Preload Adjuster
[+] CLICK HERE FOR A LARGER IMAGE...

Nitron Hydraulic Preload Adjuster

Ref: 54145

The hydraulic preload adjuster allows you to quickly and easily change the preload on the spring via a remote knob making c-spanners and other tools unnecessary.

This is particularly useful for people who regularly take pillion passengers and/or luggage, as it allows you to compensate for a variation in load, maintaining the comfort and handling characteristics of your motorcycle by retaining the correct ride height. It is also very useful for bikes used on the track, particularly for racers as it allows fine tuning of the ride height which often needs to be different from one track to another.

This is normally added at the time a shock is purchased but the unit can also be retrofitted to your existing Nitron shock to replace the manual preload adjustment. Please call HPS to check the availability for your existing shock first as there may be a possibility that the spring will need to be replaced for that of a smaller one and please note the retro fitment of a hydraulic preload adjuster requires your shock to be returned to us.





(Shipping costs calculated before checkout and 20% UK VAT/tax will be removed for non-UK destinations)